by Tanya Electrocomp | Mar 25, 2021 | Product News
Industrial Enclosure Selection “White Paper”
As well as the traditional electrical junction boxes and distribution cabinets found throughout the factory environment, the increased use of distributed electronic control and monitoring equipment in advanced manufacturing facilities means that more systems and sub-systems are now to be found in close proximity to the plant and equipment being controlled.
For designers of such systems, this can bring new challenges when specifying the enclosure. If you are in that position, don’t worry, Hammond have your back! As a long-established designer and manufacturer of industrial enclosures, they know the questions to ask. Hammond have put together a white paper that sets out the different things you need to consider when selecting the housing for your system
Main considerations
- Size, temperature extremes and humidity
- Materials
- Aggressive atmospheres: acidic, alkaline and solvents
- Environmental sealing: IP Ratings
- Fixings and closures
- Manufacturer’s technical support
For more info, contact Heidi
Download the white paper
by Tanya Electrocomp | Mar 25, 2021 | Product News
SRF3225AB and SRF3225TAC Series
1210-Size Automotive Grade Common Mode Chip Inductors
These automotive-grade common-mode inductors are constructed with a ferrite core and are bifilar-wound delivering a compact size, shielded construction for low radiation and high impedance over a broad frequency range to suppress Electromagnetic Interference (EMI) coming into or leaving the system. The 0.2/0.3 mm height side-wall terminal at each end of the inductor core helps enhance the component’s mechanical strength after it is assembled on the board.
The Model SRF3225AB and SRF3225TAC series are AEC-Q200 compliant for high reliability and durability applications. The Model SRF3225AB was designed for noise suppression in 2-wire UTP (unshielded twisted pair) cable automotive audio bus systems. The SRF3225TAC series is focused on common-mode noise suppression for classic CAN and higher data rate CAN-FD Class II applications
Features
- Bifilar-wound
- Shielded construction for low radiation
- High impedance, wide EMI suppression frequency range
- AEC-Q200 compliant
- Meets IEC 62228-3 standard (Model SRF3225TAC-101Y)
- RoHS compliant and Halogen-free
For more info, contact Deon
https://www.bourns.com/products/magnetic-products/common-mode-chip-inductors-aec-q200-compliant
by Tanya Electrocomp | Mar 25, 2021 | Product News
RTK-1010
The RTK-1010 is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter-level positioning accuracy. It adopts 12 nm process and integrates efficient power management architecture to perform low power and high sensitivity.
The module supports concurrent reception of GPS, GLONASS, BeiDou, GALILEO, and QZSS to improve the availability and reliability of RTK solutions even in harsh environments.
Features
- Dual-frequency and multi-constellation RTK positioning solution
- Support GPS, GLONASS, GALILEO, BEIDOU and QZSS
- Capable of SBAS (WAAS, EGNOS, MSAS, GAGAN)
- Support 135-channel GNSS
- Low power consumption
- Fast TTFF at low signal level
- Small form factor 10.1 x 9.7 x 2.2 mm
- SMD type with stamp holes; RoHS compliant
- IATF 16949 quality control
For more info, contact Julian
https://www.locosystech.com/en/product/rtk-module-1010.html
by Tanya Electrocomp | Mar 25, 2021 | Product News
PJU GRP IP66 Industrial Enclosures for Indoor or Outdoor Installation
The PJU family of GRP (glass reinforced polyester) enclosures is designed for use as instrument enclosures, electric, hydraulic, or pneumatic control housings, electrical junction boxes, or terminal wiring enclosures and are suitable for both indoor and outdoor installation. They provide outstanding insulation and protection where equipment may be hosed down or be installed in very wet, high temperature, or highly corrosive environments
They are ideal for equipment that uses wi-fi, Bluetooth, or other non-wired communication technologies as the aerials can be safely positioned inside the enclosure without suffering signal attenuation.
Features
- Nine sizes from 154 x 159 x 105 to 521 x 413 x 257
- Corrosion-resistant
- Chemical resistant
- UV stable for external installation
- IP66 sealed (UL/CSA Type 4X)
- Mounting flanges or feet
- Hinged or lift-off covers
- Choice of twist/snap latches, snap latches, or securing screws
- Solid or clear covers
- Optional internal fixed panels in GRP, aluminium, galvanised mild steel or 304 stainless steel
- Optional hinged aluminium panels
- Lower cost than stainless steel alternatives
- Non-metallic material permits internal antenna for communication devices
- Pole mounting kits are available
- Suitable for round poles up to 375mm diameter
- Suitable for square or rectangular shapes
For more info, contact Heidi
https://www.hammfg.com/electrical/products/non-metallic/pju
by Tanya Electrocomp | Mar 25, 2021 | Product News
B43548 Series Aluminum Electrolytic Capacitor with Snap-In Terminals.
These capacitors feature an excellent maximum ripple current capability of 9.80 A (400 V, 100 Hz, 60 °C). This makes them ideal for demanding applications in power electronics. The capacitors are designed for a maximum operating temperature of 105 °C, have a rated voltage range of 400 V to 500 V, and reach under these conditions a useful lifetime of 3000 h. Depending on the rated voltage, they offer a capacitance range of 68 µF to 820 µF in case sizes of 25 x 25 mm to 35 x 55 mm (d x l). A special feature of the series is the high level of resilience against rapid charging and discharging cycles.
With their outstanding ripple current capability, these capacitors are ideal for use in frequency converters, industrial power supplies, UPS systems, medical devices, and photovoltaic inverters. Due to their robustness and resilience against rapid charging and discharging cycles, they also meet the demanding requirements of servo drive applications.
Further information on the products can be found at www.tdk-electronics.tdk.com/en/alu_snap.
Main fields of application
- Frequency converters
- Servo drives
- Photovoltaic inverters
- UPS systems
- Medical devices
- Industrial power supplies
Main features and benefits
- Outstanding ripple current capability
- High CV product and compact measurements
- High level of robustness in relation to rapid charging and discharging cycles
For more info, contact Deon
by Tanya Electrocomp | Mar 25, 2021 | Product News
Multifuse® High-Temperature Polymer PTC Resettable Fuses
Bourns is pleased to announce the expansion of its industry-leading portfolio of 125°C rated polymer PTC resettable fuse thermistors. The new MF-MSHT (1812) and MF-FSHT (0603) model families join Bourns’ already successful line of MF-USHT, MF-NSHT, and MF-PSHT model families that come in standard surface mount 1210, 1206 0805 EIA footprints, respectively.
Features
- Resettable polymer PTC thermistors for high-reliability overcurrent and over-temperature protection
- Operating temperature range from -40°C to 125°C
- Higher hold currents (up to 1.75 A) at elevated ambient operating temperatures, with lower thermal derating factors, compared to traditional 85 ˚C rated consumer-grade models
- Up to 42 VDC and 40 A maximum ratings
- EIA 0603 to 1812 surface mount footprints
- Tape and reel packaging for automated assembly
- AEC-Q200 compliant and automotive grade
- UL, CSA, and TÜV recognized
- IATF 16949 certified production site
- RoHS compliant
For more info, contact Deon
